ICOPER SYSTEM

Introduzione

icoper

icoper® is an acrylic based liquid product that prevents the waterproofing from deterioration caused by water stagnation.
Performances:
One component Highly Water Resistant Solvent free, Environmental friendly Safe for all application purposes Excellent resistance to UV rays and to industrial fumes Long term Elasticity Jointless Total adhesion on surface Cold flexibility -20°C Walkable icoper® is ideal for waterproofing of roofing in general, flat roofs, sloping roofs, walls, foundation and retaining walls, eaves, terraces, stacks, old bitumen coats, hanging gardens, polyurethane foam. icoper® can be applied by any traditional tools: brush roller, airless machine. icoper® is resistant to tropical high temperatures, which indeed enchances its characteristics. Thanks to its range of colours (grey, red, black, brown, beje, white, green) icoper® obtains positive aesthetic results.

icoper®-hp is an acrylic based liquid product fibre-reinforced, that prevents the waterproofing from deterioration caused by water stagnation.
Performances:
One component Fiber reinforced Highly Water Resistant Solvent free, Environmental friendly Safe for all application purposes Excellent resistance to UV rays and to industrial fumes Long term Elasticity Jointless Total adhesion on surface Cold flexibility -20°C Suitable for high transit icoper®-hp is ideal for waterproofing of roofing in general, flat roofs, sloping roofs, walls, foundation and retaining walls, eaves, terraces, stacks, old bitumen coats, hanging gardens, polyurethane foam and especially for under-tile application, in fact tiles and ceramics can be applied directly on Icoper Hp by traditional glues. icoper®-hp can be applied by any traditional tools: brush roller, trowel. icoper®-hp is resistant to tropical high temperatures, which indeed enchances its characteristics. Thanks to its range of colours (grey, red, black, brown, beje, white, green) icoper®-hp obtains positive aesthetic results.

Index

Pagine

Watch the icoper® movie (the movie require Flash Player)
Movie 1
Movie 2
Movie 3
Movie 4
Movie 5
Movie 6
Movie 7

1. Re-waterproofing

  1. Monolithic base structural reinforced-concrete support (covering floor).
  2. Old prefabricated sheat.
  3. Application of acrylic primer in the solvent phase, ICOFISS, carried out with a roller at the rate of 100 gr/m2.
  4. After drying for 15-20 minutes, the primary coat of icoper® is applied, with of a roller, a brush or an airless, with a consumption of 1,0 ÷ 1,2 kg/m2. After drying for 4-8 hours, the secondary coat of icoper® is applied, with a roller, a brush or an airless, with a consumption of 1,0 ÷ 1,2 kg/m2.

Note: The treatment of prefabricated sheat self-protected by means of slate, will require a coat of icoper® diluted with 50% of water as a sealer for scales and coupling coat.

1. Plane covering - not pedestrian

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Cement mortar scotia, placed along the connection line between the horizontal surface and the wall.
  3. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  4. After complete drying, apply the primary coat of icoper® as it is, using a roller, a brush or an airless, consumption 1,0 ÷ 1,2 kg/m2. After drying, 4-8 hours, apply the secondary coat of icoper®, using a roller, a brush or an airless, at the rate of 1,0 ÷ 1,2 kg/m2.
  5. Flashing (seal the connection points).

Note: If there are any joints or covering details (wall-floor connections), we suggest to use an elastic reinforcement band.

2. Plane covering - pedestrian

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Flashing (seal the connection points).

Note: If there is any joint, we suggest to use an elastic reinforcement band.

3. Eaves - channels

  1. Reinforced-concrete eaves - channels.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. After complete drying, apply the primary coat of icoper® as it is, using a roller, a brush or an airless, consumption 1,0 ÷ 1,2 kg/m2. After drying, 4-8 hours, apply the secondary coat of icoper®, using a roller, a brush or an airless, at the rate of 1,0 ÷ 1,2 kg/m2.
  4. Flashing (seal the connection points).
  5. Covering elements.

4. Wooden inclinated close roof

  1. Structural base divided support (covering floor) in wooden board.
  2. Lime whiting of the support with ICOFISS, an acrylic impregnant agent in a solvent phase, to be applied using a roller, a brush or an airless, average consumption from 150 to 200 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Tinsmithing.
  5. Covering elements.

4. Ventilated roof

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Tinsmithing.
  5. Thermal insulation element dry placed, on polyethylene film.
  6. Covering elements.

4. Cold or Reversed roof

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Dividing coat or sliding in a polyethylene film, dry placed and with some overplaced elements on about 20 cm.
  5. Thermoisolant element in rigid panels made of expanded extruted polystyrene with closed cells, with skin on both sides, dry placed on the base structural support.
  6. Filtering coat made of polyester NT synthetic felt not degradable, with some overplaced elements on about 20 cm.
  7. Gravel.

5. Windows for roofs

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Windows for roofs (the specific collar will be prepared depending on the type).
  5. Covering elements.

6. Roof-trees

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Roof-tree.
  3. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  4. After drying, apply the primary coat of icoper® using a roller or a brush, and consumption of 1,0 kg/m2.
  5. When it is fresh, place an articulation made of TNT 60 ÷ 100 gr/m2, with a width of about 10 cm.
  6. Apply the secondary coat of icoper® using a roller or a brush, and consumption of 1,0 kg/m2.
  7. Covering elements.

7. Floating floor

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Dividing and protection coat dry placed, with some overplaced elements on about 20 cm.
  5. Concrete squared bricks, placed on specific support feet.

8. Earth retaining wall

  1. Reinforced concrete wall.
  2. Cement mortar scotia, placed along the connection line between the horizontal surface and the wall.
  3. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  4. After complete drying, apply the primary coat of icoper® as it is, using a roller, a brush or an airless, consumption 1,0 ÷ 1,2 kg/m2. After drying, 4-8 hours, apply the secondary coat of icoper®, using a roller, a brush or an airless, at the rate of 1,0 ÷ 1,2 kg/m2.
  5. Drainage conduit.
  6. Drainage protection coat (ashlar-work, bolted work, insulation jacket, etc.).
  7. Re-covering and cultivable soil.
  8. Flashing.

9. Bouches de sol

  1. Concrete soil mouth internal plane.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. After drying, apply the primary coat of icoper® using a roller or a brush, and consumption of 1,0 kg/m2.
  4. When it is fresh, place an articulation made of TNT 60 ÷ 100 gr/m2, with a width of about 10 cm.
  5. Apply the secondary coat of icoper® using a roller or a brush, and consumption of 1,0 kg/m2.
  6. Flashing.
  7. Treatment of the wall-floor corner as at point 4.
  8. Wall coating.
  9. Grille.
  10. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  11. After complete drying, apply the primary coat of icoper® as it is, using a roller, a brush or an airless, consumption 1,0 ÷ 1,2 kg/m2. After drying, 4-8 hours, apply the secondary coat of icoper®, using a roller, a brush or an airless, at the rate of 1,0 ÷ 1,2 kg/m2.
  12. Protection material for the waterproofing product.

10. Bath-rooms and showers

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. 1-component frost-proof glue or 2-component.
  5. Shower.
  6. Tiles.

Note: The wall-floor connection line will be treated with icoper®-hp as at an height of at least 10 cm. The laying of tiles will be carried out after an ageing time of at least 2 days.

11. Underfloor

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. 1-component frost-proof glue or 2-component.
  5. Tiles.
  6. Plaster and wall finishing

Note: The laying of tiles will be carried out after an ageing time of icoper®-hp of at least 2 days. If there are any joint, we suggest to use an elastic reinforcement band.

12. Roof gardens

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. Apply the primary coat of fibre-reinforced waterproofing product icoper®-hp-ar, using a flat trowel, consumption as at 1,0 kg/m2of product. After drying, 4-8 hours, apply the secondary coat of icoper®-hp-ar using a flat trowel, at the rate of 1,0 kg/m2 of product, proceeding with a crossed coat with respect to the primary coat.
  4. Dividing coat in a polyethylene film, dry placed and with some overplaced elements on about 20 cm.
  5. Cement mortar scotia, placed along the connection line between the horizontal surface and the wall.
  6. Drainage protection coat (HDPE).
  7. Filtering coat made of polyester or polypropylene non degradable, dry placed on the primary coat, with some overplaced elements of about 20 cm.
  8. Cultivable soil.
  9. Flashing (eventual coating with icoper®).
  10. Prefabricated coping of perimetric coping made of stone or concrete, adhering placed using proper glues or mortars.

13. French window threshold

  1. Concrete plastering troweled nearly smooth and free of dust.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. After drying, apply the primary coat of icoper® using a roller or a brush, and consumption of 1,2 ÷ 1,5 kg/m2.
  4. When it is fresh, place a mechanical reinforcement formed by glassfibre MAT, as at 225 gr/m2, paying attention to avoid any air pocket with the waterproofing layer that could damage the adhesion.
  5. After drying, 4-8 hours, apply the secondary coat of icoper® applied using a roller or a brush, and a consumption of 1,2 ÷ 1,5 kg/m2.
  6. 1-component frost-proof glue for external or 2-component.
  7. Tiles.
  8. Threshold.
  9. French window.

Note: The laying of tiles will be carried out after an ageing time of icoper®-hp of at least 2 days.

14. Iron coverings

  1. Base divided structural support (covering floor) made of factory-painted folded metal sheets.
  2. The factory-painted metal sheet will be carefully cleaned, eliminating all not completely adherent parts, and oxyded points will be treated with a rust converter and a rust-preventer (ICORUST, ICOPOX PM 102): if damaged zones are present on a large area, we suggest to extend this treatment on the whole surface.
  3. The application oficoper® as it is will be made directly, both on the factory-painted metal sheet and on the eventual rust-preventer treatment: the primary coat of product will be applied, using a roller, a brush or an airless, and a consumption of 1,0 ÷ 1,2 kg/m2. After drying, 4-8 hours, apply the secondary coat of using a roller, a brush or airless, and a consumption of 1,0 ÷ 1,2 kg/m2.

Note:Any overlap of metal sheet must be considered separately: we suggest to apply a polyurethane glue (ICOJOINT PUR M) before the impermeabilization.

14. Protection of fibrous concrete sheeting

  1. Base divided structural support (covering floor) in asbestos cement sheetings.
  2. Lime whiting of the support using icoper® diluted with water as at a variable rate from 30% to 50%; applied with a roller, a brush or an airless, with an average consumption of 300 gr/m2.
  3. After complete drying, apply the primary coat of icoper® as it is, using a roller, a brush or an airless, consumption 1,0 ÷ 1,2 kg/m2. After drying, 4-8 hours, apply the secondary coat of icoper®, using a roller, a brush or an airless, at the rate of 1,0 ÷ 1,2 kg/m2.

REMARKS

All data refer to the standards in force at the time of issue. Program srl reserves the right to change them without prior notice. All data provided have been gathered from our practical experience and are test averages. Despite their reliability they do not constitute commitment and responsibility on the part of Program srl. The buyer and user are responsible for the product suitability to its usage.